Edge-lighting Crystal Galaxy Manual do Utilizador descarregar pdf (Página 2)

CONICAL NIPPLE

STRAIN RELIEF TUBE

COAXIAL CABLE

4: Feed the coaxial cable through the conical nipple and flared

side of the strain relief tube. Slide the conical nipple and

strain relief tube down the coaxial cable.

COAXIAL CABLE

5: Feed the coaxial cable into the coaxial fixture connector. The

coaxial cable will come to a stop point.

9: Push the strain relief tube completely into the coaxial

fixture connector. Make sure the slot on the strain relief

tube is not inline with the M4 set screw.

10: Tighten the M4 set screw with the 2mm Allen wrench.

2MM ALLEN WRENCH

M4 SET SCREW

STRAIN RELIEF TUBE

COAXIAL FIXTURE

CONNECTOR

1.5MM ALLEN WRENCH

M3 SET SCREW

WRINKLE

OUTER METAL JACK INNER WIRE

6: Keep feeding the coaxial cable in until the inner wire is

visible in the screw hole of the fixture connector tip. The

outer metal jacket will start to wrinkle.

7: Hold the fixture connector in place. Replace and tighten the

M3 set screw on fixture connector tip with the 1.5mm Allen

wrench.

8: Pull down the outer metal jacket to smooth the wrinkles.

1 2 3 4

Sem comentários

Edge-lighting Crystal Galaxy Manual do Utilizador Página 2