Edge-lighting 4 x 4 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Iluminação Edge-lighting 4 x 4. Edge Lighting 4 x 4 User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
Installation Instructions for 4 x 4
904-4X4-H1-04
SAVE THESE INSTRUCTIONS!
- This product is ETL listed for indoor and outdoor locations.
- RISK OF FIRE:
- This product can be wall or ceiling mounted.
- This product can mount to either a 4" square electrical box
with round plaster ring or an octagon electrical box.
- This product can be dimmed with a low voltage electronic
dimmer.
This product must be installed 4 ft above
the ground for wet locations.
IMPORTANT INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
Install the Fixture
1:
canopy.
2: Pull the mounting plate off of the fixture canopy.
Remove the two Phillips screws on the sides of the fixture
A
1
MOUNTING
PLATE
FIXTURE CANOPY
PHILLIPS SCREW
1
3: Connect the white transformer wire to the neutral power
wire with a wire nut.
4: Connect the black transformer wire to the hot power wire
with a wire nut.
5: Place the transformer and transformer wires inside the
electrical box.
2
B
TRANSFORMER
WIRE NUT
3
4
To reduce the risk of fire, electrical shock, exposure to
excessive UV radiation, or injury to persons:
- Do not look directly at the lamp while the fixture is on.
- RISK OF FIRE: Use only the type of lamp and maximum
wattage indicated in this instruction manual.
- Never cover the halogen lamp with anything other than a
lamp shield provided by Edge Lighting and never place
flammable material close to the fixture.
- Never turn the fixture on and off by connecting and
disconnecting the halogen lamp.
- Do not touch the fixture head, shade or lamp shield while
the fixture is on. These surfaces may be VERY HOT.
- Do not touch lamp at anytime. Use a soft cloth instead as oil
from skin may damage lamp.
- It is normal for a new halogen lamp to produce minor
smoke when first turned on.
- Do not operate the luminaire with a missing or damaged
shield.
- Turn power off and allow to cool before replacing lamp.
4X4-H1-_
1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
1
© 2009 Edge Lighting. All Rights Reserved.
Vista de página 0
1 2

Resumo do Conteúdo

Página 1 - Install the Fixture

Installation Instructions for 4 x 4904-4X4-H1-04SAVE THESE INSTRUCTIONS!- This product is ETL listed for indoor and outdoor locations.- RISK OF FIRE:

Página 2 - Install the Lamp

MOUNTING PLATEELECTRICAL BOX HOLEC6: Line up the mounting plate with the electrical box holes, and secure it in place by tightening the two #8-32

Comentários a estes Manuais

Sem comentários